Occasionally, mostly due to other sources rebuilding their UI, an out-of-order lock freeze can be observed with Source Mirror. This is unwanted, so we need to move the freezing logic into a place where freezing shouldn't happen.
Fixes#228
Actually fixes#61
Moves the menu for StreamFX to the primary menu, so that it is not hidden under tools. This makes it clearer to the user if their installation of StreamFX is working correctly, in addition to reducing the steps necessary to use the menu.
Also the 'About StreamFX' dialog now actually shows up for every update, as expected.
Adds support for enumerations, a different way of selecting how something should behave in a shader. Enumerations rely on a continuous list of values, and will automatically detect how many values there are in the enumeration. Only non-vector types are supported as enumeration entries, and array/vector parameters can have each member set to a different enumeration value.
Furthermore suffixes now are properly assigned, and 'bool' no longer causes shaders to stop rendering. Additionally by inlining some functions and using std::string_view we can achieve a slightly better performance than before.
Using std::string_view over std::string (and const std::string&) has the advantage that we skip potential temporary std::string objects that are immediately thrown away, thus slowing down the code. It can also be implicitly cast to std::string, which makes it compatible with existing code that uses std::string.
The high priority CUDA stream causes libOBS to be at a lower priority than the tracking, which is not what we want. Instead we want tracking to be incomplete in those cases, rather than slowing down encoding and other things.
Geometry updates are also now done once per frame instead of one per tracking update, which should improve the smoothness without affecting performance too much. Additionally all tracking info is now in the 0..1 range, which drastically simplifies some math - especially with texture coordinates.
To deal with tracking and updates being asynchronous, a very simple approximation of movement velocity has been added. This is mostly wrong, but it can bridge the gap where tracking updates are slower, as the values are all filtered anyway.
Adds a new CMake option "ENABLE_PROFILING" which enables all CPU and GPU performance profiling available in StreamFX for tracking what's actually causing things to be slow.
Asynchronous rendering allows the GPU to perform work while the CPU performs other work, and is significantly faster than lockstep immediate rendering. By reusing existing render targets we can see a performance improvement of up to 500%, while still doing the same things.
The new libOBS API allows us to directly access the underlying API instead of having to mess around in memory. By using it we can avoid crashing in case the compiler for it is different, or in case the actual back end structure changes.
Additionally the mostly unimplemented and unused options have also been removed, which streamlines the use of this class even further and reduces both shader and code complexity.
Finally by optimizing the use of the internal render target we can achieve a speed up of up to 3000% over the old way, allowing for many more mipmapped filters.
Q_INIT_RESOURCE and Q_CLEANUP_RESOURCE can't be called from within a namespace and instead have to be in outside of the namespace, so by moving them into small inline functions we can fulfill this restriction.
Related: #192#155
Fixes rendering at unexpected sizes by first rendering to a render target and then rendering the contents of that render target to the frame buffer instead. This also prevent rendering twice or more, which might cause severe FPS impact.
Implements support for various new UI features that weren't possible up until now, such as an 'About StreamFX' window with a thank you to everyone that supported the project up until now.
Through converting the code to a threaded asynchronous approach, the libOBS video renderer no longer has to wait on our tracking code to run, and we can enjoy a little bit of extra calculation time before we actually have to do anything.
However due to the remaining synchronization with the Direct3D11/OpenGL context, it is not entirely safe to spend a full frame tracking as libOBS will then start skipped/dropping frames. Even though the priority of the stream is now increased, this still means that we can't just sit around and have to quickly finish all work.
Related #150
Load additional functions from CUDA and add new enumerations to support them:
* cuDevicePrimaryCtxSetFlags allows us to sched scheduling mode for the GPU.
* cuCtxgetStreamPriorityRange allows us to check which priority levels are supported.
* cuStreamCreateWithPriority allows us to create streams with non-default priority.
The scheduler mode is now set to yield so that other threads can do work when we hit an eventual stalling problem. Streams can also now be created with higher priority and different flags, if necessary. In most cases this should allow CUDA resources to execute even while the GPU is under heavy load.
Previously sources had to manually implement migration code, which resulted in unresolvable regression issues due to the lack of version and commit tagging. With the new migration code, all sources automatically have this version and commit tagging at all times, and as such can now have a temporary regression fixed without the user needing to change any values manually.
As OBS Studio locks some mutexes in a different order depending on what actions are being done, using modified_properties for GPU work causes things to freeze in place. Instead have users manually click the refresh button when they changed files in order to prevent this freeze from happening.
Fixes: #118
With this, GCC 8 and above should now be able to compile the project both in obs-studio and as a standalone install. Some features are currently still not fully supported and require extra work, but the majority of things are supported and work out of the box. Exact feature parity can be looked up here on the wiki: https://github.com/Xaymar/obs-StreamFX/wiki/Platform-Feature-Parity
Related: #119#98#30
This header includes all common data between headers used in the plugin. This should improve cross-platform compiling support whenever possible, as all platform-dependent common includes and defines can be done here.
Ever wished you had a professional camera operator to highlight and follow the action, ensuring the audience never misses a beat? Thanks to NVIDIA, you can now do this at home for free! The new NVIDIA AR SDK unlocks augmented reality features, including motion tracking for faces.
This allows me to provide you with an automated zoom and cropping solution for your video camera to transform your streams into a slick, polished broadcast, where you’ll always be the star of the show. Don’t forget - everything is customizable so the possibilities are endless. You can even recreate that Futurama squinting meme if you wanted to (with some scripting)!
The filter requires compatible Nvidia RTX hardware and the Nvidia AR SDK Runtime to be installed ahead of time. This filter is considered "stable" and shouldn't change much from version to version.
Due to the 'nvcuda' library being part of the driver, it falls in a clause of the GPL which allows us to load and interface with system drivers. Since we can't rely on Nvidias headers here (incompatible license), most of this was pulled from FFmpeg and other things were found out via testing.
'Time.x' gets inaccurate if OBS Studio is running for more than two hours, therefore we have to do something to fix it. By allowing the shader code to control when things loop using 'Time.y' (0..1) and 'Time.z' (the number of times 'Time.y' wrapped back to 0), a much more stable animation can be achieved.
These allow you to apply any kind of filtering to a any source, using just standard HLSL. Just like transitions, one extra parameter is set called 'InputA'.
Fixes#95
With this, the first proper shader effect is now possible. By using the four new automated shader parameters 'InputA', 'InputB', 'TransitionTime' and 'TransitionSize' you can write your own transition in HLSL.
Fixes#96
Due to render logic required for transitions, some of the render logic is split into an additional function called 'prepare_render'. Additionally the storage for some temporary objects has been removed as it these objects usually do not outlive their rendering time anyway.
Related: #96#95#94#5
This fixes#116 which was caused by a refactor in commit efb6b0b9be. This bug was left undiscovered until users started upgrading from the last stable version to the current pre-release.
For an unknown reason, OBS Studio v25.x now causes a freeze to happen at this location. This should hopefully work around that issue by ensuring that we are in a location that does not cause an unusual lock order.
On highly parallel systems (> 4 Threads) audio had a chance of being played back out of order, causing it to jitter. This queue should help eliminate the issue entirely.
Fixes#111
Previously a wrong blend state caused a slight discoloration on transparent sources, which was caused by assuming them to always be fully solid without transparency. By instead relying on OBS to do the rendering we do not have to deal with blend states as much and instead can simply enjoy the result.
Fixes#104
* Remove Minimum Bitrate as it is not supported by the encoder.
* Add several default states (-1 or Default) to options.
* Possibly fix bitrate lock with CQP and CQ mode.
* Fix log output for bitrate and B-Frames.
The new logic drastically simplifies Source Mirror and reduces the attack surface for bugs introduced by humans. Additionally the new layout detection should help with improved audio mirroring which hopefully will not crash libobs as often.
Fixes#61.
This thread pool can take large or small tasks and as such alleviates the burden of having a thread per source. Particularly for large setups, this drastically reduces the number of threads running in the background waiting for work.
Fixes support for OBS_SOURCE_CUSTOM_DRAW sources and refactors the class onto better isolated and wrapped classes to deal with specific tasks. This drastically improves stability without causing code complexity to increase, and makes the code vastly easier to read too.
Related: #99
Scaling shouldn't be part of the Source and instead should be done as a filter. Not only does supporting it drastically increase code complexity, it also doesn't add anything that is really necessary as you can do everything it did better in an actual transform.
Caching wasn't actually used except for scaling and was mostly broken too, causing flickering.
Adds support for specifying Minimum Bitrate directly in the UI instead of requiring custom settings to do so. Additionally Adaptive I/B-Frames are now only shown if Look-Ahead is a value greater than 0 frames.
Quality Minimum can also now be left at a default value of -1, the Quality group is no longer toggleable and Quality Target moved into the group. Settings options on the context is now searching children too (if there are any).
Finally, some C++17 formatting was done.
Fixes#101
Scaling is now fully supported for Floats and Integers, which allows much higher precision inputs, or upscaling to a different range. Complex functions for scaling are not supported as those would be a scripting thing and should be kept as that (OBS Studio has built in Lua scripting).
Additionally, enumerations are now correctly loaded with data.
Related #5
Allow for overriding type and size of an element, opening the path for `int#[]`, `float#[]`, `int#x#`, `float#x#`, `bool#x#`, `vector<type, #>` and `matrix<type, #, #>`. Also allows for specifying the exact type of texture instead of hoping the user gets it right, as well as samplers.
Parameters are also now created if they are invisible, which means that the properties() function must not be called, but they must still be used like any other. This is due to a problem with default values not being applied all the time, and sometimes just vanishing.
The code also now throws exceptions with reasonable text, which should be caught by the gfx::shader implementation and refuse a load of the effect. No other state should be modified at that point, so care must be taken that up until the moment the complete initialization is done no other state is modified.
Thanks to the workaround in obs::tools, gfx::shader::shader now supports dynamically rebuilding the properties with new properties without crashing OBS Studio. This effectively allows you to have an up to date view of the current parameters for the shader technique.
Additionally with file watching, live development of shaders is possible at very little cost. Currently only file times and size is looked at every 333ms, but in the future it is possible to also watch for file renames and more.
The current implementation of obs_properties_remove_by_name corrupts the obs_properties_t object whenever it is called on the first or last property in the list. This leads to rapid unscheduled disassembly, and therefore must be fixed in order for this function to be used.
Fixed by upstream PR https://github.com/obsproject/obs-studio/pull/2257.
Removes the stutter when re-opening the properties dialog which was caused by recompiling the same exact shader every time this happened. Also paves the way for simple file watching.
