(MSM6258, MSM6295, QSound, Sega PCM, ADPCM-A, ADPCM-B, YMZ280B, RF5C68)
Instrument color and icons are placeholder.
different volume range, hard panned/soft panned and/or independent volume per output, chip-dependent features (global volume, echo, etc)
Allow use sample in instrument tab for chip with sample support
Prepare to support X1-010 Seta 2 style bankswitch behavior
Prepare to support AY89x0 PCM DAC
Support volume for PCE sample (DAC)
Fix Lynx, Y8950 sample pitch matches to sample preview
Support PCM DAC with backward and pingpong loop mode
Reduce some codes
Add Sega PCM, AY89x0, QSound, PCM DAC, Lynx per-channel debug support
- implement E1xy/E2xy Defle bug when using same note twice
- add SNK Touchdown Fever preset
- update README.md and to-do list
- update credits
thank you for your patience!
see you in 0.6pre1.5 coming soon...
* 'master' of https://github.com/tildearrow/furnace: (70 commits)
whoops
GUI: AY8930 credits
GUI: fix inability to close subsongs
BANK
OPN: wire up ExtCh system
fix build failure
dev95 - multiple songs in a single file (READ)
DO NOT USE - THIS FAILS - WORK IN PROGRESS
enforce asset limits
old .dmf loading improvements
add AICA and YMZ ADPCM formats
allocate ID for YMZ280B
harden .fur file saver
Fix AY VGM output, Fix presets
preparations for UI improvements
GUI: add more presets
prepare for ExtCh OPN/OPNA
GUI: clarify that lock layout doesn't work yet
GUI: remember last state of order edit mode
GUI: store edit/followOrders/followPattern state
...
# Conflicts:
# src/engine/fileOps.cpp
# src/engine/platform/ym2610.cpp
# src/engine/platform/ym2610b.cpp
# src/engine/sample.cpp
# src/engine/sample.h
# src/engine/sysDef.cpp
# src/gui/doAction.cpp
# src/gui/sysConf.cpp
experimental feature! proceed with caution.
if you experience song corruption or crashes, report issue immediately!
files with multiple songs will be readable in older versions of Furnace,
but only the first song will be read in those versions.
issue #199
* 'master' of https://github.com/tildearrow/furnace:
dev94 - add a full linear pitch mode, part 1
YM2610(B): use f-num/block baseFreq calculation
GUI: remove insLoadAlwaysReplace setting
GUI: right click menu for open instrument
GUI: add a threshold for macro right click
OPZ: remove debug printf
GUI: add macro right click menu
GUI: prepare for macro right click menu
update gitignore
add something
prepare for something
did i fix macOS build?
GUI: macro edit improvements
* 'master' of https://github.com/tildearrow/furnace:
fix sample saving
add extra FM effects to effect post handler
dev91 - it's a breaking change
aaaaaa
AY8930: Fix tone and noise period in expanded mode.
OPL: fix possible crash
* 'master' of https://github.com/tildearrow/furnace:
YM2610: optimize oscilloscope fetch CPU usage
GUI: add audio load meter to statistics
GUI: put "OK" and "Cancel" buttons in the bottom
better FM chip names
sysDef refactor, part 3 - PLEASE READ
NO
Reduce unnecessary line
Debug improvements
AY8930: Fix VGM output.
# Conflicts:
# .gitignore
# src/engine/playback.cpp
# src/gui/debugWindow.cpp
to cam900 and grauw: I have moved the per-system effect processing code
to sysDef.cpp as lambdas
you may want to do the same when you pull this commit.
* 'master' of https://github.com/tildearrow/furnace:
maybe uninitialized
GUI: prepare for a per-channel oscilloscope?
GUI: add backdrop if system file picker is open
GUI: add ability to customize startup system
GUI: finally implement "don't scroll when moving c ursor" setting
new panning effects (80/81/82)
GUI: fix sample paste crash
GUI: implement sample scroll with mouse wheel
sysDef oopsie
# Conflicts:
# src/gui/guiConst.cpp
the panning strategy for QSound has changed!
it's now 08xy where x is left and y is right (muting is not possible though!)
this makes it consistent with other chips, plus QSound's pan range was
32 anyway
in order to toggle the QSound effect use effect 12xx
* 'master' of https://github.com/tildearrow/furnace:
dev90 - linear pitch macro option
dev89 - C64: add test/gate macro
YMU759: update system definition
more changes to autoNoteOn
SoundUnit: ring modulation
GUI: improve the maximize auto-detection a bit
GUI: possibly remember maximized state
NES: fix audio resolution being too low
update to-do list
SoundUnit: more stuff
SoundUnit: max cutoff 16383
effectRows -> effectCols
GUI: rename Amiga/Sample to Sample
This is not a sample properties table
Define the compact wave editor
Menu option, settings file
# Conflicts:
# src/gui/insEdit.cpp
* 'master' of https://github.com/tildearrow/furnace: (77 commits)
GUI: use pattern font for input latch
GUI: partially implement note input latch UI
GUI: transpose value does not transpose effect ID
GUI: prepare for note input latch UI
GUI: min ins selector width fix
GUI: separate operation masks
GUI: add missing FDS preset
GUI: prepare for separate operation mask
GUI: "none" instrument should not remove inscolumn
GUI: fix ins 0 being inserted on blank song
GUI: add a "none" option to instrument list
update to-do list
GUI: add "absorb" instrument input mode
use good default instrument when adding ins
better default instrument for OPL/OPLL
GUI: fix selection being visible in dummy row area
Further fix looped sample preview
GUI: fix about screen in power saving mode
VRC6: saw volume 63
GUI: add an effect list window
...
# Conflicts:
# src/engine/platform/amiga.cpp
# src/engine/vgmOps.cpp
# src/gui/dataList.cpp
# src/gui/guiConst.cpp
# src/gui/insEdit.cpp
# src/gui/sampleEdit.cpp
2 Pulse channels:
- 8 level pulse duty cycle, DAC mode(just ignores duty cycle)/pulse wave mode, 4 bit volume.
- Furnace support PCM playback in pulse channels with duty cycle ignore mode.
Sawtooth:
- nothing but 6 bit volume (8 bit accumulator in technically) and 12 bit frequency (periodic).
VRC6 instrument:
- 6 bit Volume macro for finer sawtooth volume handling, also 3 bit Duty cycle macro for pulse channels.
Duty, PCM mode command and Duty macro affects for pulse channel only.
It means Custom wavetable sound generator logic on Bubble System.
It's wavetable select and volume is controlled by single AY-3-8910 IO for both channels, Another AY-3-8910 IO is used for reading sound status.
Schematics: http://pdf.textfiles.com/manuals/ARCADE/K-R/Nemesis%20[Schematics]%20[English].pdf (Nemesis, derivative of Bubble system)
Bubble System 2 channel Wavetable sound generator logic is configuration with K005289, 4 bit PROM and DAC.
K005289 controls pitch and 5 bit address generator per channel, Waveform select and Volume control is tied to AY-3-8910 ports. (each port for per channels)
these configuration is better known as K005289, the part of logic.
furnace emulates this configurations as single system, waveform format is 15 level and 32 width.
its 16 channel wavetable/PCM chip, with (optional) stereo support.
Its also has envelope, this feature has similar as AY PSG's one but its shape is also stored at RAM, and each nibble in envelope data is for each output: so i decided to added some feature for more stereo-ish envelope.
Split: Envelope shape will be splitted to Left and Right half for each output.
HInv, Vinv: Envelope shape will be Horizontally/Vertically mirrored the left one.
Max sample length is sample bank size of Seta 2 arcade hardware (currently not emulated yet, nor it doesn't support on VGM).
Chip id is temporary, it can be changed with to suggestions.
cam900