tildearrow Sound Unit

a fantasy sound chip, used in the specs2 fantasy computer designed by tildearrow.

it has the following capabilities:

8 channels of either waveform or sample
stereo sound
8 waveforms (pulse, saw, sine, triangle, noise, periodic noise, XOR sine and XOR triangle)
128 widths for the pulse wave
per-channel resonant filter
ring modulation
volume, frequency and cutoff sweep units (per-channel)
phase reset timer (per-channel)

effects

10xx: set waveform.
- 0: pulse wave
- 1: sawtooth
- 2: sine wave
- 3: triangle wave
- 4: noise
- 5: periodic noise
- 6: XOR sine
- 7: XOR triangle
12xx: set pulse width. range is 0 to 7F.
13xx: set resonance of filter. range is 0 to FF.
- despite what the internal effects list says (0 to F), you can use a resonance value from 0 to FF (255).
14xx: set filter mode and ringmod.
- bit 0: ring mod
- bit 1: low pass
- bit 2: high pass
- bit 3: band pass
15xx: set frequency sweep period low byte.
16xx: set frequency sweep period high byte.
17xx: set volume sweep period low byte.
18xx: set volume sweep period high byte.
19xx: set cutoff sweep period low byte.
1Axx: set cutoff sweep period high byte.
1Bxx: set frequency sweep boundary.
1Cxx: set volume sweep boundary.
1Dxx: set cutoff sweep boundary.
1Exx: set phase reset period low byte.
1Fxx: set phase reset period high byte.
20xx: toggle frequency sweep.
- bit 0-6: speed
- bit 7: up direction
21xx: toggle volume sweep.
- bit 0-4: speed
- bit 5: up direction
- bit 6: loop
- bit 7: alternate
22xx: toggle cutoff sweep.
- bit 0-6: speed
- bit 7: up direction
4xxx: set cutoff. range is 0 to FFF.

this chip uses the Sound Unit instrument editor.

the following options are available in the Chip Manager window: