New page for the effect list, updates to chanOsc, and links to instrument types from every "system" page.
1.8 KiB
PC Speaker
40 years of one square beep - and still going! Single channel, no volume control...
real output
so far this is the only chip in Furnace which has a real hardware output option. to enable it, select file > configure chip... > PC Speaker > Use system beeper.
be noted that this will only work on Linux as Windows does not provide any user-space APIs to address the PC speaker directly!
you may configure the output method by going in Settings > Emulation > PC Speaker strategy:
evdev SND_TONE
: uses input events to control the beeper.- requires write permission to
/dev/input/by-path/platform-pcspkr-event-spkr
. - is not 100% frequency-accurate as
SND_TONE
demands frequencies, but Furnace uses raw timer periods...
- requires write permission to
KIOCSOUND on /dev/tty1
: sends theKIOCSOUND
ioctl to control the beeper.- may require running Furnace as root.
/dev/port
: writes to/dev/port
to control the beeper.- requires read/write permission to
/dev/port
.
- requires read/write permission to
KIOCSOUND on standard output
: sends theKIOCSOUND
ioctl to control the beeper.- requires running Furnace on a TTY.
outb()
: uses the low-level kernel port API to control the beeper.- requires running Furnace as root, or granting it
CAP_SYS_RAWIO
to the Furnace executable:sudo setcap cap_sys_rawio=ep ./furnace
.
- requires running Furnace as root, or granting it
real hardware output only works on BIOS/UEFI (non-Mac) x86-based machines! attempting to do this under any other device will not work, or may even brick the device (if using /dev/port
or outb()
)!
oh, and of course you also need the beeper to be present in your machine. some laptops connect the beeper output to the built-in speakers (or the audio output jack), and some other don't do this at all.
effects
ha! effects...
info
- this chip uses the Beeper instrument editor.