mirror of
https://github.com/tildearrow/furnace.git
synced 2024-11-02 02:52:40 +00:00
31 lines
1.2 KiB
Markdown
31 lines
1.2 KiB
Markdown
# Namco 163 instrument editor
|
|
|
|
The Namco 163 instrument editor consists of three tabs: "Namco 163" for control of various waveform parameters, "Wavetable" for control of the wave synth and "Macro" containing several macros.
|
|
|
|
## Namco 163
|
|
|
|
- **Load waveform**: if enabled, a waveform will be loaded when this instrument plays.
|
|
- if it isn't then only the position/length change.
|
|
- **Waveform**: determines the waveform that will be loaded.
|
|
- only appears when Load waveform is enabled.
|
|
- **Per-channel wave position/length**: when enabled, the position/length settings are split per channel.
|
|
- **Position**: determines the waveform position in RAM.
|
|
- **Length**: determines the waveform length in RAM.
|
|
|
|
## Wavetable
|
|
|
|
this allows you to enable and configure the Furnace wavetable synthesizer. see [this page](wavesynth.md) for more information.
|
|
|
|
note that setting the Update Rate to something greater than 1 and playing the instrument in two channels may result in conflicts.
|
|
|
|
## Macros
|
|
|
|
- **Volume**: volume levels sequence.
|
|
- **Arpeggio**: pitch sequence.
|
|
- **Wave Pos**: sets waveform seek position in RAM.
|
|
- **Waveform**: sets waveform.
|
|
- **Pitch**: fine pitch.
|
|
- **Wave Length**: sets waveform length.
|
|
<!--
|
|
- **Phase Reset**: trigger restart of waveform
|
|
-->
|