mirror of
https://github.com/tildearrow/furnace.git
synced 2024-11-14 16:55:06 +00:00
33 lines
1.5 KiB
Markdown
33 lines
1.5 KiB
Markdown
# Philips SAA1099
|
|
|
|
this was used by the Game Blaster and SAM Coupé. it's pretty similar to the AY-3-8910, but has stereo sound, twice the channels and two envelopes, both of which are highly flexible. the envelopes work like this:
|
|
- an instrument with envelope settings is placed on channel 2 or channel 5
|
|
- an instrument that is used as an "envelope output" is placed on channel 3 or channel 6 (you may want to disable wave output on the output channel)
|
|
|
|
# effects
|
|
|
|
- `10xy`: **set channel mode.**
|
|
- `x` toggles noise.
|
|
- `y` toggles square.
|
|
- this effect affects either the first 3 or last 3 channels, depending on where it is placed.
|
|
- `11xx`: **set noise frequency.**
|
|
- this effect affects either the first 3 or last 3 channels, depending on where it is placed.
|
|
- `12xx`: **setup envelope.** this is a bitmask.
|
|
- bit 7 toggles the envelope.
|
|
- bit 5 toggles whether to use a fixed frequency or lock to the frequency of channel 2 or 5.
|
|
- bit 4 sets the envelope resolution.
|
|
- bits 1 to 3 set the envelope shape:
|
|
- `000`: always off
|
|
- `001`: always on
|
|
- `010`: down
|
|
- `011`: down loop (saw)
|
|
- `100`: up down
|
|
- `101`: up down loop (triangle)
|
|
- `110`: up then off
|
|
- `111`: up loop (reverse saw)
|
|
- bit 0 sets whether the right output will mirror the left one.
|
|
- this effect affects either the first 3 or last 3 channels, depending on where it is placed.
|
|
|
|
# info
|
|
|
|
this chip uses the [SAA1099](../4-instrument/saa.md) instrument editor.
|