mirror of
https://github.com/tildearrow/furnace.git
synced 2024-11-20 03:25:11 +00:00
56 lines
1.7 KiB
Markdown
56 lines
1.7 KiB
Markdown
# tildearrow Sound Unit
|
|
|
|
a fantasy sound chip, used in the specs2 fantasy computer designed by tildearrow.
|
|
|
|
it has the following capabilities:
|
|
- 8 channels of either waveform or sample
|
|
- stereo sound
|
|
- 8 waveforms (pulse, saw, sine, triangle, noise, periodic noise, XOR sine and XOR triangle)
|
|
- 128 widths for the pulse wave
|
|
- per-channel resonant filter
|
|
- ring modulation
|
|
- volume, frequency and cutoff sweep units (per-channel)
|
|
- phase reset timer (per-channel)
|
|
|
|
# effects
|
|
|
|
- `10xx`: set waveform
|
|
- 0: pulse wave
|
|
- 1: sawtooth
|
|
- 2: sine wave
|
|
- 3: triangle wave
|
|
- 4: noise
|
|
- 5: periodic noise
|
|
- 6: XOR sine
|
|
- 7: XOR triangle
|
|
- `12xx`: set pulse width (0 to 7F)
|
|
- `13xx`: set resonance of filter (0 to FF)
|
|
- despite what the internal effects list says (0 to F), you can use a resonance value from 0 to FF (255)
|
|
- `14xx`: set filter mode and ringmod
|
|
- bit 0: ring mod
|
|
- bit 1: low pass
|
|
- bit 2: high pass
|
|
- bit 3: band pass
|
|
- `15xx`: set frequency sweep period low byte
|
|
- `16xx`: set frequency sweep period high byte
|
|
- `17xx`: set volume sweep period low byte
|
|
- `18xx`: set volume sweep period high byte
|
|
- `19xx`: set cutoff sweep period low byte
|
|
- `1Axx`: set cutoff sweep period high byte
|
|
- `1Bxx`: set frequency sweep boundary
|
|
- `1Cxx`: set volume sweep boundary
|
|
- `1Dxx`: set cutoff sweep boundary
|
|
- `1Exx`: set phase reset period low byte
|
|
- `1Fxx`: set phase reset period high byte
|
|
- `20xx`: toggle frequency sweep
|
|
- bit 0-6: speed
|
|
- bit 7: up direction
|
|
- `21xx`: toggle volume sweep
|
|
- bit 0-4: speed
|
|
- bit 5: up direction
|
|
- bit 6: loop
|
|
- bit 7: alternate
|
|
- `22xx`: toggle cutoff sweep
|
|
- bit 0-6: speed
|
|
- bit 7: up direction
|
|
- `4xxx`: set cutoff (0 to FFF)
|