mirror of
https://github.com/tildearrow/furnace.git
synced 2024-11-26 22:43:01 +00:00
25 lines
1.2 KiB
Markdown
25 lines
1.2 KiB
Markdown
# Philips SAA1099 instrument editor
|
|
|
|
The SAA1099 instrument editor consists of these macros:
|
|
|
|
- **Volume**: volume sequence.
|
|
- **Arpeggio**: pitch sequence.
|
|
- **Duty/Noise**: noise generator frequency. the following values are available:
|
|
- `0`: high
|
|
- `1`: mid
|
|
- `2`: low
|
|
- `3`: use frequency of channel 1 or 4 (depending on where the instrument plays).
|
|
- **Waveform**: selector between tone and noise.
|
|
- **Panning (left)**: output level for left channel.
|
|
- **Panning (right)**: output level for right channel.
|
|
- **Pitch**: fine pitch.
|
|
- **Envelope**: envelope generator settings:
|
|
- **enable**: enables the envelope generator.
|
|
- **N/A**: has no effect.
|
|
- **fixed**: toggles whether to use a fixed, slow frequency or lock to the frequency of channel 2 or 5 (depending on where the instrument plays).
|
|
- **resolution**: increases the envelope generator pitch resolution.
|
|
- **direction**: inverts the envelope.
|
|
- **cut**: cuts the envelope (producing saw wave out of tri wave)
|
|
- **loop**: toggles whether envelope is one-shot or constantly looping.
|
|
- **mirror**: sets whether the right output will mirror the left one.
|
|
- the envelope only has effect in channels 3 and 6.
|