mirror of
https://github.com/tildearrow/furnace.git
synced 2024-11-24 05:25:12 +00:00
31 lines
1.7 KiB
Markdown
31 lines
1.7 KiB
Markdown
# PC Speaker
|
|
|
|
40 years of one square beep - and still going! Single channel, no volume control...
|
|
|
|
# real output
|
|
|
|
so far this is the only chip in Furnace which has a real hardware output option.
|
|
to enable it, select file > configure chip... > PC Speaker > Use system beeper.
|
|
|
|
be noted that this will only work on Linux as Windows does not provide any user-space APIs to address the PC speaker directly!
|
|
|
|
you may configure the output method by going in Settings > Emulation > PC Speaker strategy:
|
|
|
|
- `evdev SND_TONE`: uses input events to control the beeper.
|
|
- requires write permission to `/dev/input/by-path/platform-pcspkr-event-spkr`.
|
|
- is not 100% frequency-accurate as `SND_TONE` demands frequencies, but Furnace uses raw timer periods...
|
|
- `KIOCSOUND on /dev/tty1`: sends the `KIOCSOUND` ioctl to control the beeper.
|
|
- may require running Furnace as root.
|
|
- `/dev/port`: writes to `/dev/port` to control the beeper.
|
|
- requires read/write permission to `/dev/port`.
|
|
- `KIOCSOUND on standard output`: sends the `KIOCSOUND` ioctl to control the beeper.
|
|
- requires running Furnace on a TTY.
|
|
- `outb()`: uses the low-level kernel port API to control the beeper.
|
|
- requires running Furnace as root, or granting it `CAP_SYS_RAWIO` to the Furnace executable: `sudo setcap cap_sys_rawio=ep ./furnace`.
|
|
|
|
real hardware output only works on BIOS/UEFI (non-Mac) x86-based machines! attempting to do this under any other device **will not work**, or may even brick the device (if using `/dev/port` or `outb()`)!
|
|
oh, and of course you also need the beeper to be present in your machine. some laptops connect the beeper output to the built-in speakers (or the audio output jack), and some other don't do this at all.
|
|
|
|
# effects
|
|
|
|
ha! effects...
|