mirror of
https://github.com/tildearrow/furnace.git
synced 2024-11-02 02:52:40 +00:00
52 lines
2.4 KiB
Markdown
52 lines
2.4 KiB
Markdown
# Atari Lynx instrument editor
|
|
|
|
Atari Lynx instrument editor consists of two tabs: Sample and Macros.
|
|
|
|
## Sample
|
|
|
|
for sample settings, see [the Sample instrument editor](sample.md).
|
|
|
|
the only differences are the lack of an "Use wavetable" option, and the presence of a "Use sample" one.
|
|
|
|
note that using samples on Lynx is CPU expensive!
|
|
|
|
## Macros
|
|
|
|
- **Volume**: volume sequence.
|
|
- **Arpeggio**: pitch sequence.
|
|
- **Duty/Int**: bit pattern for LFSR taps and integration.
|
|
- **Panning (left)**: output level for left channel.
|
|
- **Panning (right)**: output level for right channel.
|
|
- **Pitch**: fine pitch.
|
|
- **Phase Reset**: trigger restart of waveform/LFSR reset.
|
|
|
|
## audio generation description
|
|
|
|
Atari Lynx generates sound using a 12-bit linear feedback shift register with configurable tap. nine separate bits can be enabled to be the source of feedback: 0, 1, 2, 3, 4, 5, 7, 10 and 11. to generate _any_ sound at least one bit _must_ be enabled.
|
|
|
|
### LFSR-based synthesis
|
|
|
|
a linear-feedback shift register is one method used for random number generation.
|
|
it works by shifting a sequence of binary numbers (bits), taking the last bit into the output. then some of the bits are combined with others, doing a XOR (exclusive or) operation and then being pushed back.
|
|
|
|
think of it as a conveyor carrying glass bottles. each bottle may be empty or carrying water.
|
|
the bottle at the end is taken. if there's water, then the output is 1. if it's empty, the output is 0.
|
|
depending on the LFSR configuration, many bottles at specific positions ("taps") are looked at. these are combined from left to right, two by two:
|
|
- if two bottles are identical, an empty bottle is pushed.
|
|
- if one bottle has water but the other is empty, a water bottle is pushed.
|
|
the process is repeated indefinitely.
|
|
|
|
unlike PowerNoise, Lynx's taps are in fixed positions, but it has many of them.
|
|
|
|
### square wave
|
|
|
|
the LFSR is shifted at the rate define by sound pitch and generates square wave by setting channel output value to +volume or -volume, depending on the bit shifted in.
|
|
|
|
### triangle wave
|
|
|
|
alternatively when "int" bit is set sound wave is generated by adding or subtracting volume from output effectively producing triangle wave.
|
|
|
|
#### how triangle wave works?
|
|
|
|
hint: to obtain triangle set bits "int" and "11" in "Duty/Int" sequence and set volume to about 22.
|
|
by enabling 11th tap bit the value shifted in is negated after 11 bit is shifted in hence the volume is added for 11 cycles and then subtracted for 11 cycles.
|