This patch adds the debug command “/generate_farming_plant_rows”. The
command generates rows of plants and stems per plant type near a player.
A farming soil or glass node is placed below each node, so players can
find and examine possible gaps between a plant node and a node below.
This patch adds a new test structure to the “/spawnstruct” command which
can be spawned with this command: /spawnstruct test_structure_tnt
The structure was added to reduce manual work when examining or
verifying TNT explosion results after changes to TNT drop rate.
The code for shearing a pumpkin used minetest.swap_node() to replace a
faceless pumpkin with a carved pumpkin. This did not trigger the node
callbacks of the carved pumpkin, which meant that shearing a pumpkin
would not check for the snow golem or iron golem spawn conditions.
This patch replaces minetest.swap_node() in the code for shearing a
pumpkin with minetest.set_node(), which does trigger the callbacks;
therefore snow and iron golems can now spawn as a pumpkin is carved.
While testing the previous commit, it became clear that gourd stems do
not disconnect properly if the gourd disappears while not being dug. A
simple method to create illegal curved stems was to explode the gourd.
This patch changes gourds so that the stem curves back after a gourd is
destroyed, regardless of reason. This hopefully makes curved stems that
are not connected to matching gourds a relict of the past.
Carved pumpkins can end up being connected to a stem – either if they
were grown in a previous version of MineClone2 or Mineclonia, or if a
player carves them before harvesting them. This patch makes sure that
stems turn into unconnected stems after such a carved pumpkin is dug.
As map generation and growing mechanics have been changed to generate
uncarved pumpkins instead of carved, requiring players to shear every
pumpkin before trading it with villagers seems like useless busywork.
Shearing an uncarved pumpkin turns it into a carved pumpkin and drops
four pumpkin seeds. As map generation and growing mechanics have been
changed to generate uncarved pumpkins instead of carved, preserving a
recipe to get pumpkin pie from carved pumpkins enabled players to get
both seeds and pumpkin pie from grown pumpkins, which was unintended.
Shearing an uncarved pumpkin turns it into a carved pumpkin and drops
four pumpkin seeds. As map generation and growing mechanics have been
changed to generate uncarved pumpkins instead of carved, preserving a
recipe to get seeds from carved pumpkins enables players to get twice
the amount of seeds as intended. Because of this, the recipe must go.
The code for turning an uncarved pumpkin into a carved pumpkin using
the shears was using “above” instead of “pointed_thing.above” as the
location for its sound. This resulted in a warning being logged when
shears were being used on a pumpkin. This patch rectifies the issue.
Carved pumpkin has to be explicitly registered as a separate node, as
registering a carved pumpkin node happened as a side effect of invoking
mcl_farming:add_gourd() for the carved pumpkin.
The iron / snow golem spawning checks that trigger whenever a carved
pumpkin is placed had to be moved out of the mcl_farming:add_gourd()
invocation to preserve the existing behaviour.
Note that uncarved pumpkin must not be registered as a separate node,
as invoking mcl_farming:add_gourd() for a registered node name leads to
stems not updating when an adjacent node is manually placed or mined.
Redstone comparators have two modes, comparison mode & subtraction mode.
Before this patch, the functions to turn comparators on or off attempted
to swap nodes with comparators in the same mode, but failed to determine
the correct replacement node, if the existing node was not a comparator.
When a comparator in an on state (e.g. powered by a filled cauldron) was
flooded, the flooding dropped the comparator and replaced the comparator
node that was to be swapped out with air, which lead to a server crash.
This patch changes the functions that turn comparators on or off so they
only swap existing nodes with comparators in the same mode if the name
of the replacement node can be determined – i.e. if it is not nil.
This patch adds a new test structure to the “/spawnstruct” command which
can be spawned with this command: /spawnstruct test_structure_comparator
The structure was added to reduce manual work when examining or
verifying comparator behaviour after changes to comparator code.
Before this patch, when placing a fire above a node that would turn it
into eternal fire (e.g. Netherrack or Magma) the spawn_fire() function
would call itself infinitely via the on_construct() handler of eternal
fire – because the latter called spawn_fire() itself.
On an x86 machine, this caused a memory leak, hanging Minetest. On an
x86_64 machine though, Minetest crashed immediately, showing an error
message about a stack overflow.
Even the mitigated timers seem to have lead to slow
memory leaks. Once Minetest has used up all the RAM,
it will free some, then quickly use memory up again,
then repeat it ad nauseum, requiring 100% CPU. On a
PC with 2GB of RAM this could be reliably triggered
by having a fire burn a forest for 20 to 30 minutes.
This patch removes fire node timers completely and
instead extinguishes fire using an ABM.
This patch initializes the random number generator used in mcl_fire with
the current Unix timestamp. It also corrects two biases in fire spread
that were caused by nodes being iterated over in a predictable way.
This patch adds a new test structure to the “/spawnstruct” command which
can be spawned with this command: /spawnstruct test_structure_fireproof
The structure can be used to verify that eternal fire can be spawned by
the structure placement code. It can also be used to debug fire spread,
as according to Minecraft fire spread rules, it should be fireproof.
See <https://minecraft.fandom.com/wiki/Fire#Spread> for those rules.
In Minetest 5.4.1, calling get_player_control() on a mob returned the
empty string. Minetest commit 5eb45e1ea03c6104f007efec6dd9c351f310193d
changed this, so now calling get_player_control() on a mob returns nil.
As mcl_boats defines boats that can have a player or a mob as a driver,
code like the following crashes with a changed get_player_control() API:
local ctrl = driver:get_player_control()
if ctrl.sneak then
detach_object(driver, true)
end
Furthermore, once a world has crashed, joining it near a mob that is the
driver of a boat with such control code immediately crashes again.
When I reported this bug to Minetest, several Minetest core developers
stated that they disliked the old API and proposed other return values
for calling a mob's get_player_control() function – all different from
the empty string. Since I have some doubts that this bug will be fixed
in Minetest 5.5.0, boat code must take into account a nil return value.
Minetest issue: https://github.com/minetest/minetest/issues/11989
Before this patch, wearing a pumpkin would make body armor render as a
corrupted item held in the player's left hand instead of on their body.
Some parts of their armor would also get rendered on the player's feet.
(cherry picked from commit 12192d1a8d)
Before this patch it was possible for any user to to crash Minetest in
creative mode. This was possible because queries in the search field
were interpreted as search patterns for string.find().
A search for a single square bracket would reliably crash the server.
Also, a search for 6000 times the string “a?” would hang the server.
The solution to both bugs is to not interpret the query as a pattern.
Before this patch, growing a gourd (e.g. melon, pumpkin) would always
convert a node west of the node below the stem to dirt if belonged to
the group “dirtifies_below_solid”. This happened because of a loop in
which the variables floorpos and floor were re-used without setting a
new value … therefore, both floorpos and floor were always containing
the last values set in a previous loop instead of the correct values.
This patch fixes the problem by setting both variables in both loops.
The comparison and setting logic in the previous patch that set player
bone positions and properties conditionally incorrectly did not update
some values (like player eye level position) when they changed. This
patch fixes it and adds asserts to ensure the code works as intended.
Before this patch, Mineclonia set (and therefore sent) player bone
positions and player properties in every globalstep. This results in
about 30 TOCLIENT_ACTIVE_OBJECT_MESSAGE per second per player. This
patch adds conditional functions to set bone positions and properties.
The functions set values only when they have changed, reducing traffic.
Commit 5252952555 used string.gsub() to
strip newlines from tools in death messages. The second return value of
string.gsub() (the number of substitutions) was erroneously returned too
by get_tool_name(). This bug caused a crash whenever a skeleton killed a
player using its bow.
Players naming their tools with newlines can mess up chat with death
messages. This commit strips out newlines (\r and \n ) in the tool
name for death messages.
The minetest world is already so small that you can reach world
border from spawn in about 2 hours. I think the regen and fire
resistance are good enough to make them special.
Before this patch, the light level that makes mobs that burn in sunlight
catch fire had been mistakenly specified as minetest.LIGHT_MAX or more.
The correct light level for sunlight is LIGHT_SUN, which is one higher
than minetest.LIGHT_MAX. Since minetest.LIGHT_MAX is the maximum light
value that a node can have and torches emit light at that light level,
mobs that burn in sunlight caught fire inside torch nodes.
