* kernel: Implement Thread pinning support
This commit adds support for 8.x thread pinning changes and implement SynchronizePreemptionState syscall.
Based on kernel 13.x reverse.
* Address gdkchan's comment
* kernel: fix missing critical section leave in SetActivity
Fix Unity games
* Implement missing bits on the interrupt handler and inline update pinning function as it cannot be generic
* Fix some bugs in SetActivity and SetCoreAndAffinityMask
* Address gdkchan's comments
While I'm looking to the code, I've found some syntax issue, and a little inconsistencie between `ActivateNpad` and `ActivateNpadWithRevision`. Nothing more.
* Add the ability to toggle mute in the status bar.
* Add the ability to toggle mute in the status bar.
* Formatting fixes
* Add hotkey (F2) to mute
* Add default hotkey to config.json
* Add ability to change volume via slider.
* Fix Headless
* Fix SDL2 Problem : Credits to d3xMachina
* Remove unnecessary work
* Address gdk comments
* Toggling with Hotkey now properly restores volume to original level.
* Toggling with Hotkey now properly restores volume to original level.
* Update UI to show Volume % instead of Muted/Unmuted
* Clean up the volume ui a bit.
* Undo unintentionally committed code.
* Implement AudRen Support
* Restore intiial volume level in function definition.
* Finalize UI
* Finalize UI
* Use clamp for bounds check
* Use Math.Clamp for volume in soundio
* Address comments by gdkchan
* Address remaining comments
* Fix missing semicolon
* Address remaining gdkchan comment
* Fix comment
* Change /* to //
* Allow volume slider to change volume immediately.
Also force label text to cast to int to prevent decimals from showing in status bar
* Remove blank line
* Undo setting of volume level when "Cancel" is pressed.
* Fix allignment for settings window code
* kernel: Define InfoTYpe and make it less obscure when reading GetInfo
Also map ThreadTickCount to 25 instead of 0xF0000002 like 13.x kernel.
* kernel: Implement GetInfo IsApplication
* kernel: Implement GetInfo FreeThreadCount
The .NET 6 changes ended up causing a difference in the way we deserialise and would end up deserializing wrongly.
This commit fixes it by resoring previous behaviour while still fixing the illink warning that caused that change in the first place
* Don't blow up everything if a DLC file is missing
* change comment
* More correctly setting the "enabled" check box on dlc dialog for the add-on NSP based on the enabled state of all NCAs in the package.
* Update Ryujinx.HLE/HOS/ApplicationLoader.cs
Co-authored-by: Ac_K <Acoustik666@gmail.com>
Co-authored-by: Logan Stromberg <lostromb@microsoft.com>
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* infra: Migrate to .NET 6
* Rollback version naming change
* Workaround .NET 6 ZipArchive API issues
* ci: Switch to VS 2022 for AppVeyor
CI is now ready for .NET 6
* Suppress WebClient warning in DoUpdateWithMultipleThreads
* Attempt to workaround System.Drawing.Common changes on 6.0.0
* Change keyboard rendering from System.Drawing to ImageSharp
* Make the software keyboard renderer multithreaded
* Bump ImageSharp version to 1.0.4 to fix a bug in Image.Load
* Add fallback fonts to the keyboard renderer
* Fix warnings
* Address caian's comment
* Clean up linux workaround as it's uneeded now
* Update readme
Co-authored-by: Caian Benedicto <caianbene@gmail.com>
* kernel: Fix sleep timing accuracy
This commit corrects some mistake while comparing reversing of kernel
13.x with our own.
WaitAndCheckScheduledObjects timing accuracy was also improved.
* Make KTimeManager.WaitAndCheckScheduledObjects spin wait for sub milliseconds
Fix performance regression on Pokemon Let's Go games and possibly
others.
* Address rip's comment
* kernel: Fix issues with timeout of -1 (0xFFFFFFFF)
Fixes possible hang on Pokemon DP and possibly others
Add basic support for the CFI value being passed in X18 since 11.0.0 by the official kernel.
We do not implement any random generator atm in the kernel and as such the KSystemControl.GenerateRandom function is stubbed
This PR implements/stubs some missing calls introduced in recent firmware (13.0.0).
- `acc:u0 InitializeApplicationInfoV2` needed by ACNH.
- `aoc:u NotifyMountAddOnContent/NotifyUnmountAddOnContent/CheckAddOnContentMountStatus` checked by RE. Needed by ACNH.
- `IPurchaseEventManager PopPurchasedProductInfo` needed by Dying Light.
Now ACNH 2.0 update is fully playable, and Dying Light can boot further:
* Remove comment from code.
* Added needed RegisterInfo for TODO.
* Forgot to add two words...
* Stop being tired and fixed the one issue.
* Removing suggested line from GDKchan.
* GDK seems to have been incorrect?
* Update Ryujinx.HLE/HOS/Services/Nfc/Nfp/VirtualAmiibo.cs
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Remove a bit of unsafety around
* Regenerate StructArrayHelpers with a max element value of 256
* hle: remove unsafe marker from all struct that had it
* hle: make SoftwareKeyboardRenderer.TryCopyTo safe
* hle: remove unsafety in NpadDevice and remove AllowUnsafeBlocks from csproj
* Revert "Regenerate StructArrayHelpers with a max element value of 256"
This reverts commit f32a6e5be094f50571970eb1116b65c080781d05.
* Introduce ByteArray of various size and use that instead of ArrayXXX to avoid stackoverflow in .NET runtime type resolution
* Use ByteArray more
* Add some missing spaces on Pack = 1 for various structs
* Fix broken logic for TryCopyTo
* Address gdkchan's comment
* Address gdkchan's comment
* timezone: Make timezone implementation safe
* hle: Do not use TrimEnd to parse ASCII strings
This adds an util that handle reading an ASCII string in a safe way.
Previously it was possible to read malformed data that could cause
various undefined behaviours in multiple services.
* hid: Remove an useless unsafe modifier on keyboard update
* Address gdkchan's comment
* Address gdkchan's comment
* kernel: Clear pages allocated with SetHeapSize
Before this commit, all new pages allocated by SetHeapSize were not
cleared by the kernel.
This would cause undefined data to be pass to the userland and possibly
resulting in weird memory corruption.
This commit also add support for custom fill heap and ipc value (that is also
supported by the official kernel)
* Remove dots at the end of KPageTableBase.MapPages new documentation
* Remove unused _stackFillValue
* Fixup channel submit IOCTL syncpoint parameters
The current arguments worked by happenstance as games only ever submit
one syncpoint and request one fence back, if a game were to do something
other than this then the arguments would've been parsed entirely wrong.
* Address feedback
* kernel: Add resource limit related syscalls
This commit implements all resource limit related syscalls.
* Fix register mapping being wrong for SetResourceLimitLimitValue
* Address gdkchan's comment
* kernel: Implement SetMemoryPermission syscall
This commit implement the SetMemoryPermission syscall accurately.
This also fix KMemoryPermission not being an unsigned 32 bits type and
add the "DontCare" bit (used by shared memory, currently unused in
Ryujinx)
* Update MemoryPermission mask
* Address gdkchan's comments
* Fix a nit
* Address gdkchan's comment
* Fix race when EventWait is called and a wait is done on the CPU
* This is useless now
* Fix EventSignal
* Ensure the signal belongs to the current fence, to avoid stale signals
It seems that certain games (Link's Awakening, Xenoblade DE) had their fences reached already when posting framebuffers, so the signal that a frame was ready would go out _before_ the frame was enqueued, and the render loop would fail to dequeue anything and "skip" a frame.
This was resulting in their performance lowering dramatically after some loading transitions, as a frame signal would be consumed and presentation would be one frame behind.
It's possible this might have eventually caused deadlocks in these games or others, if it happened twice.
* spl: Implement IGeneralInterface GetConfig
This PR implement the GetConfig call of the spl service. This is currently needed for some homebrews which currently needs Ignore Missing Service to boot. Now it's fixed.
Implementation was done using Atmosphère code and REing too.
* Addresses gdkchan feedback
This PR stubs and implements some clkrst call because they are used to overclock the Switch hardware and it's pointless in our case as we emulate the system.
Everything was done checked by RE.
Fixes#2686
This PR stubs some irs service calls which are needed to get some games playable or at least bootable since we don't support IR data throught real JoyCon for now.
- Stubs `IIrSensorServer` `StopImageProcessor`, `RunMomentProcessor`, `RunClusteringProcessor`, `RunImageTransferProcessor`, `GetImageTransferProcessorState`, `RunTeraPluginProcessor`. All calls are a bit checked by RE.
Closes#2267, #2248, #2126
Night Vision and SpyAlarm are now bootable (but still unplayable due to the lack of the IR data):
* vi: Unify resolutions values and accurate implementation of them.
To continue what was made in #2618, I've REd `vi` service a bit. Now values and checks related to displays are more accurate.
- `am` GetDefaultDisplayResolution / GetDefaultDisplayResolutionChangeEvent have more informations on what the service does.
- `vi:u/vi:m/vi:s` GetDisplayService are now accurate.
- `IApplicationDisplay` GetRelayService, GetSystemDisplayService, GetManagerDisplayService, GetIndirectDisplayTransactionService, ListDisplays, OpenDisplay, OpenDefaultDisplay, CloseDisplay, GetDisplayResolution are now properly implemented.
- Some other calls are cleaned or have extra checks accordingly to RE.
Additionnaly, `IFriendService` have some wrong aligned things, and `pm:info` service placeholder was missing.
* just use _openedDisplayInfo.Remove()
* use context.Memory.Fill()
* fix some casting
* remove unneeded comment
* cleanup
* uses TryAdd
* displayId > ulong
* GetDisplayResolution > ulong
* UL
* Disable Pause/Resume menu instead of trying to hide them
* Fix Resume menu being active before renderer starts
* Fix emulator not being able to close properly
* hos: Cleanup the project
Since a lot of changes has been done on the HOS project, there are some leftover here and there, or class just used in one service, things at wrong places, and more.
This PR fixes that, additionnally to that, I've realigned some vars because I though it make the code more readable.
* Address gdkchan feedback
* addresses Thog feedback
* Revert ElfSymbol
* Add a "Pause Emulation" option and hotkey
Closes Ryujinx#1604
* Refactoring how pause is handled
* Applied suggested changes from review
* Applied suggested fixes
* Pass correct suspend type to threads for suspend/resume
* Fix NRE after stoping emulation
* Removing SimulateWakeUpMessage call after resuming emulation
* Skip suspending non game process
* Pause the tickCounter in the ExecutionContext
* Refactoring tickCounter pause/resume as suggested
* Fix Config migration to add pause hotkey
* Fixed pausing only application threads
* Fix exiting emulator while paused
* Avoid pause/resume while already paused/resumed
* Cleanup unused code
* Avoid restarting audio if stopping emulation while in pause.
* Added suggested changes
* Fix ConfigurationState
* Initial Implementation
About as fast as nvidia GL multithreading, can be improved with faster command queuing.
* Struct based command list
Speeds up a bit. Still a lot of time lost to resource copy.
* Do shader init while the render thread is active.
* Introduce circular span pool V1
Ideally should be able to use structs instead of references for storing these spans on commands. Will try that next.
* Refactor SpanRef some more
Use a struct to represent SpanRef, rather than a reference.
* Flush buffers on background thread
* Use a span for UpdateRenderScale.
Much faster than copying the array.
* Calculate command size using reflection
* WIP parallel shaders
* Some minor optimisation
* Only 2 max refs per command now.
The command with 3 refs is gone. 😌
* Don't cast on the GPU side
* Remove redundant casts, force sync on window present
* Fix Shader Cache
* Fix host shader save.
* Fixup to work with new renderer stuff
* Make command Run static, use array of delegates as lookup
Profile says this takes less time than the previous way.
* Bring up to date
* Add settings toggle. Fix Muiltithreading Off mode.
* Fix warning.
* Release tracking lock for flushes
* Fix Conditional Render fast path with threaded gal
* Make handle iteration safe when releasing the lock
This is mostly temporary.
* Attempt to set backend threading on driver
Only really works on nvidia before launching a game.
* Fix race condition with BufferModifiedRangeList, exceptions in tracking actions
* Update buffer set commands
* Some cleanup
* Only use stutter workaround when using opengl renderer non-threaded
* Add host-conditional reservation of counter events
There has always been the possibility that conditional rendering could use a query object just as it is disposed by the counter queue. This change makes it so that when the host decides to use host conditional rendering, the query object is reserved so that it cannot be deleted. Counter events can optionally start reserved, as the threaded implementation can reserve them before the backend creates them, and there would otherwise be a short amount of time where the counter queue could dispose the event before a call to reserve it could be made.
* Address Feedback
* Make counter flush tracked again.
Hopefully does not cause any issues this time.
* Wait for FlushTo on the main queue thread.
Currently assumes only one thread will want to FlushTo (in this case, the GPU thread)
* Add SDL2 headless integration
* Add HLE macro commands.
Co-authored-by: Mary <mary@mary.zone>
Cleans "sdcard:/Nintendo/save" and deletes "sdcard:/save" when opening the emulator.
Works around invalid encryption when keys or the SD card encryption seed are changed.
