diff --git a/.github/FUNDING.yml b/.github/FUNDING.yml deleted file mode 100644 index 666b4b76..00000000 --- a/.github/FUNDING.yml +++ /dev/null @@ -1,4 +0,0 @@ -github: Xaymar -patreon: Xaymar -custom: ["https://www.paypal.me/xaymar", xaymar.com] -issuehunt: xaymar diff --git a/CMakeLists.txt b/CMakeLists.txt index a908b382..89b4f03c 100644 --- a/CMakeLists.txt +++ b/CMakeLists.txt @@ -1092,8 +1092,6 @@ list(APPEND PROJECT_PRIVATE_SOURCE # obs_source_info_t, obs_source_t, obs_weak_source_t "source/obs/obs-source-factory.hpp" "source/obs/obs-source-factory.cpp" - "source/obs/obs-source-info.hpp" - "source/obs/obs-source-info.cpp" "source/obs/obs-source.hpp" "source/obs/obs-source.cpp" "source/obs/obs-source-active-child.hpp" diff --git a/cmake/DownloadProject.CMakeLists.cmake.in b/cmake/DownloadProject.CMakeLists.cmake.in deleted file mode 100644 index 30d4a192..00000000 --- a/cmake/DownloadProject.CMakeLists.cmake.in +++ /dev/null @@ -1,17 +0,0 @@ -# Distributed under the OSI-approved MIT License. See accompanying -# file LICENSE or https://github.com/Crascit/DownloadProject for details. - -cmake_minimum_required(VERSION 3.0.0) - -project(${DL_ARGS_PROJ}-download NONE) - -include(ExternalProject) -ExternalProject_Add(${DL_ARGS_PROJ}-download - ${DL_ARGS_UNPARSED_ARGUMENTS} - SOURCE_DIR "${DL_ARGS_SOURCE_DIR}" - BINARY_DIR "${DL_ARGS_BINARY_DIR}" - CONFIGURE_COMMAND "" - BUILD_COMMAND "" - INSTALL_COMMAND "" - TEST_COMMAND "" -) diff --git a/cmake/DownloadProject.cmake b/cmake/DownloadProject.cmake deleted file mode 100644 index e300f426..00000000 --- a/cmake/DownloadProject.cmake +++ /dev/null @@ -1,182 +0,0 @@ -# Distributed under the OSI-approved MIT License. See accompanying -# file LICENSE or https://github.com/Crascit/DownloadProject for details. -# -# MODULE: DownloadProject -# -# PROVIDES: -# download_project( PROJ projectName -# [PREFIX prefixDir] -# [DOWNLOAD_DIR downloadDir] -# [SOURCE_DIR srcDir] -# [BINARY_DIR binDir] -# [QUIET] -# ... -# ) -# -# Provides the ability to download and unpack a tarball, zip file, git repository, -# etc. at configure time (i.e. when the cmake command is run). How the downloaded -# and unpacked contents are used is up to the caller, but the motivating case is -# to download source code which can then be included directly in the build with -# add_subdirectory() after the call to download_project(). Source and build -# directories are set up with this in mind. -# -# The PROJ argument is required. The projectName value will be used to construct -# the following variables upon exit (obviously replace projectName with its actual -# value): -# -# projectName_SOURCE_DIR -# projectName_BINARY_DIR -# -# The SOURCE_DIR and BINARY_DIR arguments are optional and would not typically -# need to be provided. They can be specified if you want the downloaded source -# and build directories to be located in a specific place. The contents of -# projectName_SOURCE_DIR and projectName_BINARY_DIR will be populated with the -# locations used whether you provide SOURCE_DIR/BINARY_DIR or not. -# -# The DOWNLOAD_DIR argument does not normally need to be set. It controls the -# location of the temporary CMake build used to perform the download. -# -# The PREFIX argument can be provided to change the base location of the default -# values of DOWNLOAD_DIR, SOURCE_DIR and BINARY_DIR. If all of those three arguments -# are provided, then PREFIX will have no effect. The default value for PREFIX is -# CMAKE_BINARY_DIR. -# -# The QUIET option can be given if you do not want to show the output associated -# with downloading the specified project. -# -# In addition to the above, any other options are passed through unmodified to -# ExternalProject_Add() to perform the actual download, patch and update steps. -# The following ExternalProject_Add() options are explicitly prohibited (they -# are reserved for use by the download_project() command): -# -# CONFIGURE_COMMAND -# BUILD_COMMAND -# INSTALL_COMMAND -# TEST_COMMAND -# -# Only those ExternalProject_Add() arguments which relate to downloading, patching -# and updating of the project sources are intended to be used. Also note that at -# least one set of download-related arguments are required. -# -# If using CMake 3.2 or later, the UPDATE_DISCONNECTED option can be used to -# prevent a check at the remote end for changes every time CMake is run -# after the first successful download. See the documentation of the ExternalProject -# module for more information. It is likely you will want to use this option if it -# is available to you. Note, however, that the ExternalProject implementation contains -# bugs which result in incorrect handling of the UPDATE_DISCONNECTED option when -# using the URL download method or when specifying a SOURCE_DIR with no download -# method. Fixes for these have been created, the last of which is scheduled for -# inclusion in CMake 3.8.0. Details can be found here: -# -# https://gitlab.kitware.com/cmake/cmake/commit/bdca68388bd57f8302d3c1d83d691034b7ffa70c -# https://gitlab.kitware.com/cmake/cmake/issues/16428 -# -# If you experience build errors related to the update step, consider avoiding -# the use of UPDATE_DISCONNECTED. -# -# EXAMPLE USAGE: -# -# include(DownloadProject) -# download_project(PROJ googletest -# GIT_REPOSITORY https://github.com/google/googletest.git -# GIT_TAG master -# UPDATE_DISCONNECTED 1 -# QUIET -# ) -# -# add_subdirectory(${googletest_SOURCE_DIR} ${googletest_BINARY_DIR}) -# -#======================================================================================== - - -set(_DownloadProjectDir "${CMAKE_CURRENT_LIST_DIR}") - -include(CMakeParseArguments) - -function(download_project) - - set(options QUIET) - set(oneValueArgs - PROJ - PREFIX - DOWNLOAD_DIR - SOURCE_DIR - BINARY_DIR - # Prevent the following from being passed through - CONFIGURE_COMMAND - BUILD_COMMAND - INSTALL_COMMAND - TEST_COMMAND - ) - set(multiValueArgs "") - - cmake_parse_arguments(DL_ARGS "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN}) - - # Hide output if requested - if (DL_ARGS_QUIET) - set(OUTPUT_QUIET "OUTPUT_QUIET") - else() - unset(OUTPUT_QUIET) - message(STATUS "Downloading/updating ${DL_ARGS_PROJ}") - endif() - - # Set up where we will put our temporary CMakeLists.txt file and also - # the base point below which the default source and binary dirs will be. - # The prefix must always be an absolute path. - if (NOT DL_ARGS_PREFIX) - set(DL_ARGS_PREFIX "${CMAKE_BINARY_DIR}") - else() - get_filename_component(DL_ARGS_PREFIX "${DL_ARGS_PREFIX}" ABSOLUTE - BASE_DIR "${CMAKE_CURRENT_BINARY_DIR}") - endif() - if (NOT DL_ARGS_DOWNLOAD_DIR) - set(DL_ARGS_DOWNLOAD_DIR "${DL_ARGS_PREFIX}/${DL_ARGS_PROJ}-download") - endif() - - # Ensure the caller can know where to find the source and build directories - if (NOT DL_ARGS_SOURCE_DIR) - set(DL_ARGS_SOURCE_DIR "${DL_ARGS_PREFIX}/${DL_ARGS_PROJ}-src") - endif() - if (NOT DL_ARGS_BINARY_DIR) - set(DL_ARGS_BINARY_DIR "${DL_ARGS_PREFIX}/${DL_ARGS_PROJ}-build") - endif() - set(${DL_ARGS_PROJ}_SOURCE_DIR "${DL_ARGS_SOURCE_DIR}" PARENT_SCOPE) - set(${DL_ARGS_PROJ}_BINARY_DIR "${DL_ARGS_BINARY_DIR}" PARENT_SCOPE) - - # The way that CLion manages multiple configurations, it causes a copy of - # the CMakeCache.txt to be copied across due to it not expecting there to - # be a project within a project. This causes the hard-coded paths in the - # cache to be copied and builds to fail. To mitigate this, we simply - # remove the cache if it exists before we configure the new project. It - # is safe to do so because it will be re-generated. Since this is only - # executed at the configure step, it should not cause additional builds or - # downloads. - file(REMOVE "${DL_ARGS_DOWNLOAD_DIR}/CMakeCache.txt") - - # Create and build a separate CMake project to carry out the download. - # If we've already previously done these steps, they will not cause - # anything to be updated, so extra rebuilds of the project won't occur. - # Make sure to pass through CMAKE_MAKE_PROGRAM in case the main project - # has this set to something not findable on the PATH. - configure_file("${_DownloadProjectDir}/DownloadProject.CMakeLists.cmake.in" - "${DL_ARGS_DOWNLOAD_DIR}/CMakeLists.txt") - execute_process(COMMAND ${CMAKE_COMMAND} -G "${CMAKE_GENERATOR}" - -D "CMAKE_MAKE_PROGRAM:FILE=${CMAKE_MAKE_PROGRAM}" - . - RESULT_VARIABLE result - ${OUTPUT_QUIET} - WORKING_DIRECTORY "${DL_ARGS_DOWNLOAD_DIR}" - ) - if(result) - message(FATAL_ERROR "CMake step for ${DL_ARGS_PROJ} failed: ${result}") - endif() - execute_process(COMMAND ${CMAKE_COMMAND} --build . - RESULT_VARIABLE result - ${OUTPUT_QUIET} - WORKING_DIRECTORY "${DL_ARGS_DOWNLOAD_DIR}" - ) - if(result) - message(FATAL_ERROR "Build step for ${DL_ARGS_PROJ} failed: ${result}") - endif() - -endfunction() diff --git a/source/common.hpp b/source/common.hpp index 9ed2fcf3..8529c1ca 100644 --- a/source/common.hpp +++ b/source/common.hpp @@ -54,7 +54,6 @@ #include "version.hpp" #include "util/util-bitmask.hpp" #include "util/util-library.hpp" -#include "util/util-math.hpp" #include "util/util-profiler.hpp" #include "util/util-threadpool.hpp" #include "util/utility.hpp" diff --git a/source/obs/obs-source-info.cpp b/source/obs/obs-source-info.cpp deleted file mode 100644 index e69de29b..00000000 diff --git a/source/obs/obs-source-info.hpp b/source/obs/obs-source-info.hpp deleted file mode 100644 index e69de29b..00000000 diff --git a/source/util/util-math.hpp b/source/util/util-math.hpp deleted file mode 100644 index b4504d3c..00000000 --- a/source/util/util-math.hpp +++ /dev/null @@ -1,30 +0,0 @@ -/* -* Modern effects for a modern Streamer -* Copyright (C) 2017 Michael Fabian Dirks -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; either version 2 of the License, or -* (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA -*/ - -#pragma once -#include -#include -#include -#include - - - -namespace util { - -} // namespace util diff --git a/source/util/util-memory.cpp b/source/util/util-memory.cpp deleted file mode 100644 index cf4d8fce..00000000 --- a/source/util/util-memory.cpp +++ /dev/null @@ -1,31 +0,0 @@ -/* -* Modern effects for a modern Streamer -* Copyright (C) 2017 Michael Fabian Dirks -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; either version 2 of the License, or -* (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA -*/ - -#include "util-memory.hpp" -#include -#include -#include - -#if defined(_MSC_VER) && (_MSC_VER <= 2100) -//#define USE_MSC_ALLOC -#elif defined(_cplusplus) && (__cplusplus >= 201103L) -#define USE_STD_ALLOC -#endif - -using namespace std;