mirror of
https://github.com/tildearrow/furnace.git
synced 2024-11-23 13:05:11 +00:00
93 lines
3.7 KiB
Markdown
93 lines
3.7 KiB
Markdown
Performance Counters
|
|
====================
|
|
|
|
FFTW measures execution time in the planning stage, optionally taking advantage
|
|
of hardware performance counters. This document describes the supported
|
|
counters and additional steps needed to enable each on different architectures.
|
|
|
|
See `./configure --help` for flags for enabling each supported counter.
|
|
See [kernel/cycle.h](kernel/cycle.h) for the code that accesses the counters.
|
|
|
|
ARMv7-A (armv7a)
|
|
================
|
|
|
|
`CNTVCT`: Virtual Count Register in VMSA
|
|
--------------------------------------
|
|
|
|
A 64-bit counter part of Virtual Memory System Architecture.
|
|
Section B4.1.34 in ARM Architecture Reference Manual ARMv7-A/ARMv7-R
|
|
|
|
For access from user mode, requires `CNTKCTL.PL0VCTEN == 1`, which must
|
|
be set in kernel mode on each CPU:
|
|
|
|
#define CNTKCTL_PL0VCTEN 0x2 /* B4.1.26 in ARM Architecture Rreference */
|
|
uint32_t r;
|
|
asm volatile("mrc p15, 0, %0, c14, c1, 0" : "=r"(r)); /* read */
|
|
r |= CNTKCTL_PL0VCTEN;
|
|
asm volatile("mcr p15, 0, %0, c14, c1, 0" :: "r"(r)); /* write */
|
|
|
|
Kernel module source *which can be patched with the above code* available at:
|
|
https://github.com/thoughtpolice/enable_arm_pmu
|
|
|
|
`PMCCNTR`: Performance Monitors Cycle Count Register in VMSA
|
|
----------------------------------------------------------
|
|
|
|
A 32-bit counter part of Virtual Memory System Architecture.
|
|
Section B4.1.113 in ARM Architecture Reference Manual ARMv7-A/ARMv7-R
|
|
|
|
For access from user mode, requires user-mode access to PMU to be enabled
|
|
(`PMUSERENR.EN == 1`), which must be done from kernel mode on each CPU:
|
|
|
|
#define PERF_DEF_OPTS (1 | 16)
|
|
/* enable user-mode access to counters */
|
|
asm volatile("mcr p15, 0, %0, c9, c14, 0" :: "r"(1));
|
|
/* Program PMU and enable all counters */
|
|
asm volatile("mcr p15, 0, %0, c9, c12, 0" :: "r"(PERF_DEF_OPTS));
|
|
asm volatile("mcr p15, 0, %0, c9, c12, 1" :: "r"(0x8000000f));
|
|
|
|
Kernel module source with the above code available at:
|
|
[GitHub thoughtpolice/enable\_arm\_pmu](https://github.com/thoughtpolice/enable_arm_pmu)
|
|
|
|
More information:
|
|
http://neocontra.blogspot.com/2013/05/user-mode-performance-counters-for.html
|
|
|
|
ARMv8-A (aarch64)
|
|
=================
|
|
|
|
`CNTVCT_EL0`: Counter-timer Virtual Count Register
|
|
------------------------------------------------
|
|
|
|
A 64-bit counter, part of Generic Registers.
|
|
Section D8.5.17 in ARM Architecture Reference Manual ARMv8-A
|
|
|
|
For user-mode access, requires `CNTKCTL_EL1.EL0VCTEN == 1`, which
|
|
must be set from kernel mode for each CPU:
|
|
|
|
#define CNTKCTL_EL0VCTEN 0x2
|
|
uint32_t r;
|
|
asm volatile("mrs %0, CNTKCTL_EL1" : "=r"(r)); /* read */
|
|
r |= CNTKCTL_EL0VCTEN;
|
|
asm volatile("msr CNTKCTL_EL1, %0" :: "r"(r)); /* write */
|
|
|
|
*WARNING*: Above code was not tested.
|
|
|
|
`PMCCNTR_EL0`: Performance Monitors Cycle Count Register
|
|
------------------------------------------------------
|
|
|
|
A 64-bit counter, part of Performance Monitors.
|
|
Section D8.4.2 in ARM Architecture Reference Manual ARMv8-A
|
|
|
|
For access from user mode, requires user-mode access to PMU (`PMUSERENR_EL0.EN
|
|
== 1`), which must be set from kernel mode for each CPU:
|
|
|
|
#define PERF_DEF_OPTS (1 | 16)
|
|
/* enable user-mode access to counters */
|
|
asm volatile("msr PMUSERENR_EL0, %0" :: "r"(1));
|
|
/* Program PMU and enable all counters */
|
|
asm volatile("msr PMCR_EL0, %0" :: "r"(PERF_DEF_OPTS));
|
|
asm volatile("msr PMCNTENSET_EL0, %0" :: "r"(0x8000000f));
|
|
asm volatile("msr PMCCFILTR_EL0, %0" :: "r"(0));
|
|
|
|
Kernel module source with the above code available at:
|
|
[GitHub rdolbeau/enable\_arm\_pmu](https://github.com/rdolbeau/enable_arm_pmu)
|
|
or in [Pull Request #2 at thoughtpolice/enable\_arm\_pmu](https://github.com/thoughtpolice/enable_arm_pmu/pull/2)
|