# samples

In the context of Furnace, a sound sample (usually just referred to as a sample) is a string of numbers that hold sampled PCM audio.

In Furnace, these samples can be generated by importing a .wav (think of it as an higher quality MP3) file.

## supported systems

As of Furnace 0.5.5, the following sound chips have sample support:
 - NES/Ricoh 2A03 (PCM only, no DPCM, and only on channel 5)
 - Sega Genesis/YM2612 (channel 6 only; but only if there exists a `1701` effect that gets played on or before a trigger for a sample)
 - PC Engine/TurboGrafx 16/Huc6280 (same conditions as above)
 - Amiga/Paula (on all channels AND resamplable, but you need to make an instrument with the Amiga format and tie it to a sample first)
 - Arcade/SEGA PCM (same as above but you don't need to make an instrument for it and you have to use the `20xx` effect command to resample your samples)
 - Neo Geo/Neo Geo EXT-Ch2 (on the last 5 channels only and can be resampled the same way as above)

Furnace also has a feature where you can make an Amiga formarted instrument on the YM2612 and Huc6280 to resample a sample you have in the module.

# the sample editor

You can actually tweak your samples in Furnace's sample editor, which can be accessed by clicking on `window` (at the top of the screen) then clicking on `sample editor`.

In there, you can modify certain data pertaining to your sample, such as the:
 - volume of the sample (from 0% of the original to 200% of the original)
 - pitch of the sample (from 1/6 of the original sample pitch to 6x the original sample pitch)
 - and the sample rate of the sample (from 1KHz (1,000Hz) to 32KHz (32,000Hz)).

To apply the changes you made to a sample, just click the `apply` button at the bottom, near the preview button.